toilet_glass_text

Vitrum III

 schafer_vitrum3_a
 schafer_text4
 schafer_vitrum3_b  schafer_vitrum3_a
CONSTRUCTION TYPE :

Enamelled, scratch-proof SCHÄFER safety glass fitted to anodised aluminium connecting elements and fittings.

WALLS AND DOORS :

Enamelled SCHÄFER safety glass, (float) 10 mm thick, resistant to stains. All corners polished smooth. Entire installation to be resistant to corrosion and sea water.

CONSTRUCTION :

Glass elements, assembled with connecting elements made from anodised aluminium.

Over the front side a horizontal, continuous aluminium round section, 30 mm diameter, 5 mm thick with aluminium clamps at foot level, in which the elements are to be clamped and stabilised.

Wall-fastening by means of aluminium clamps, the bottom clamp closed underneath in order to prevent sagging of the wall in the long-term. All connecting elements to be glued, and in addition attached with screws.

All screw attachments to be stainless steel security torx screws with a security pin put in the screw opening. Other screws are not permitted.

The entire assembly must be TÜV certified (GS certification).

FITTINGS :

Self-closing doors using two maintenance-free aluminium stirrup hinges with stainless steel pivots and bands of high-strength polymer. Hinges with springs are not permitted. Doors alternatively self-closing or self-opening. Bands glued on to the glass surfaces and in addition fastened with screws. Protection against pinched fingers and visual cover provided by aluminium cylindrical pipes on the hinge side. Visual cover on the lock side provided by glued-on aluminium ridges which are additionally held by the lock and the door catch. Ridges which are only glued on are not permitted.

  Stock-lock of anodised aluminium with stainless steel bolt. Locks with plastic bolts are not permitted.  Locking by means of SCHÄFER aluminium one-hand fittings. Inside easily graspable locking wheel, outside aluminium button with integrated unoccupied/occupied display und emergency unlocking. Locks without emergency unlocking are not permitted.

FEET :

On the floor, screwed-in anodised aluminium panels with welded-on cylindrical bars (solid), 12 mm diameter to adjust height. Stainless steel feet are not permitted (Sea water- and chlorine-resistant). Covering with anodised aluminium rosette. Anodised aluminium foot-clamp with insert nut, in which the glass elements are to be framed.

STANDARD EQUIPMENT :

One clothes-hook, one doorstopper per cubicle.

COLOURS :

Glass elements according to manufacturers’ colour palette. All fittings natural colour and anodised E6/EV1.

HEIGHT :

Headroom 2010 mm incl. 150 mm ground clearance.

MATERIALS:

All fittings must be corrosion-proof, anodised (E6/EV1) and 100% recyclable. Plate finished aluminium parts are not permitted. All glass colourings to be lead- and cadmium-free, 100% recyclable.

 

Welcome to visit our job reference

 
Top
 

Vitrum II

 schafer_vitrum2_b
schafer_text3
 schafer_vitrum2_a
CONSTRUCTION TYPE :

Enamelled, scratch-proof SCHÄFER safety glass fitted to anodised aluminium connecting elements and fittings.

WALLS AND DOORS :

Enamelled SCHÄFER safety glass, (float) 10 mm thick, resistant to stains. All corners polished smooth. Entire installation to be resistant to corrosion and sea water.

CONSTRUCTION :

Glass elements, assembled with connecting elements made from anodised aluminium.

Over the front side a horizontal, continuous aluminium round section, 30 mm diameter, 5 mm thick with aluminium clamps at foot level, in which the elements are to be clamped and stabilised.

Wall-fastening by means of aluminium clamps, the bottom clamp closed underneath in order to prevent sagging of the wall in the long-term. All connecting elements to be glued, and in addition attached with screws.

All screw attachments to be stainless steel security torx screws with a security pin put in the screw opening. Other screws are not permitted.

The entire assembly must be TÜV certified (GS certification).

FITTINGS :

Self-closing doors using two maintenance-free aluminium stirrup hinges with stainless steel pivots and bands of high-strength polymer. Hinges with springs are not permitted. Doors alternatively self-closing or self-opening. Bands glued on to the glass surfaces and in addition fastened with screws. Protection against pinched fingers and visual cover provided by aluminium cylindrical pipes on the hinge side. Visual cover on the lock side provided by glued-on aluminium ridges which are additionally held by the lock and the door catch. Ridges which are only glued on are not permitted.

Stock-lock of anodised aluminium with stainless steel bolt. Locks with plastic bolts are not permitted. Locking by means of SCHÄFER aluminium one-hand fittings. Inside easily graspable locking wheel, outside aluminium button with integrated unoccupied/occupied display und emergency unlocking. Locks without emergency unlocking are not permitted.

FEET :

On the floor, screwed-in anodised aluminium panels with welded-on cylindrical bars (solid), 12 mm diameter to adjust height. Stainless steel feet are not permitted (Sea water- and chlorine-resistant). Covering with anodised aluminium rosette. Anodised aluminium foot-clamp with insert nut, in which the glass elements are to be framed.

STANDARD EQUIPMENT :

One clothes-hook, one doorstopper per cubicle.

COLOURS :

Glass elements according to manufacturers’ colour palette. All fittings natural colour and anodised E6/EV1.

HEIGHT :

Headroom 2010 mm incl. 150 mm ground clearance.

MATERIALS :

All fittings must be corrosion-proof, anodised (E6/EV1) and 100% recyclable. Plate finished aluminium parts are not permitted. All glass colourings to be lead- and cadmium-free, 100% recyclable.

Welcome to visit our job reference

 
Top
 

Anchor G

  Offer innovative architects a delighting element of glass addition to the original attributes of strength, styling, durability and practicality of fascinating appearance and good performance of the system which will certainly appreciated by specifiers
anchor_glass_pic1  anchor_glass_pic02
 anchor_glass_pic03anchor_glass_pic04  anchor_glass_pic5

Door, Division & Pilaster Panel:

12mm or 18mm thick HED Stratificato Panel with black core and both sides laminated of scratch resistance finish. All compiled with EN438 standard.

Door:

6mm or 13mm thick “Vidrio” laminated & tempered glass with VIR interlayer.

Engineered Stainless Steel Hardware:

Gravity hinge with rubber bearing, thumb-turn lock with indication and emergency opening facility, angle bracket or U channel, functional coat hook with doorstop and HED Floor Anchor F2 Mechanism. All in strict accordance to manufacturer’s instruction.

Welcome to visit our job reference

 
Top
 

Carroza G

  carroza_glass_pic2  carroza_glass_pic3
Floating impression because of the recessed

feet and headrail system.

carroza_glass_pic1

Door, Division & Pilaster Panel:

12mm thick HED Stratificato Panel with black core and both sides laminated of scratch resistance finish. All compiled with EN438 standard.

Door:

6mm or 13mm thick “Vidrio” laminated & tempered glass with VIR interlayer.

Engineered Stainless Steel Hardware:

Recessed headrail system with panel holder, gravity hinge with rubber bearing, adjustable support leg at division panel, durable door lock with indication and emergency opening facility, angle bracket or U channel, functional coat hook with doorstop. All in strict accordance to manufacturer’s instruction.

Welcome to visit our job reference

 
Top
 

Metalli G

Metalli – G cubicle system is an attractive toilet partition of contemporary design. The vibrant range of colors from Stratificato Compact crossover with the innovative and brilliant laminated safety glass, presenting a innumerable design opportunities for intelligent Architects and Designers.metalli_glass_pic1
metalli_glass_pic2
 metalli_glass_pic3

Door, Division & Pilaster Panel:

12mm or 13mm thick HED Stratificato Panel with black core and both sides laminated of scratch resistance finish. All compiled with EN438 standard.

Door:

6mm or 13mm thick “Vidrio” laminated & tempered glass with VIR interlayer

Engineered Stainless Steel Hardware:

Gravity hinge, adjustable leg, durable door lock with indication and emergency opening device, angle bracket, stabilizing headrail with panel holders and functional coat hook with bumper. All in strict accordance to manufacturer’s instruction

Welcome to visit our job reference

 
Top
 

Return                          Top